確認漏水原因

　　Confirm the cause of water leakage

　　在維修水管閥門之前，首先需要確認漏水的原因。一般來說，水管閥門漏水主要有以下幾種原因：

　　Before repairing the water pipe valve, it is necessary to first confirm the cause of the leakage. Generally speaking, there are several reasons for water pipe valve leakage:

　　1閥門密封墊老化或損壞

　　1. Valve gasket aging or damaged

　　2閥門密封圈變形或損壞

　　Valve sealing ring deformation or damage

　　3閥門質量不佳

　　Poor quality of valve 3

　　4水管受到外力撞擊

　　4 water pipes are impacted by external forces

　　處理過程

　　Processing procedure

　　1水管閥門漏水，首先要確認閥門上的螺母松動漏水，這種情況下漏水最簡單有效的方法就是用手擰兩邊的螺母。

　　When a water pipe valve leaks, the first step is to confirm that the nut on the valve is loose and leaking. In this case, the simplest and most effective way to prevent leakage is to manually tighten the nuts on both sides.

　　2由于閥門使用時間長，里面的墊圈老化，進而導致閥門漏水。這種情況下，最簡單的處理方法，則是更換密封墊圈。

　　Due to the prolonged use of the valve, the gasket inside has aged, leading to water leakage. In this case, the simplest solution is to replace the sealing gasket.

　　3閥門壓力罩漏水，由于長期開關經常使用，閥門內的填充物磨損漏水，處理這種情況的方法是關閉閥門，卸下閥門的壓力罩，然后將細長的棉線纏繞三到四圈即可。最后，用扳手擰緊壓力罩即可。

　　The pressure cover of valve 3 is leaking. Due to frequent use of the valve for a long time, the filling material inside the valve is worn and leaking. The solution to this situation is to close the valve, remove the pressure cover of the valve, and then wrap the thin cotton thread three to four times. Finally, tighten the pressure cover with a wrench.

　　4用扳手夾緊閥門大端的六角部分，逆時針旋轉，拆卸閥門，更換新閥門，順時針旋轉擰緊即可。

　　Use a wrench to clamp the hexagonal part of the large end of the valve, rotate counterclockwise to disassemble the valve, replace it with a new valve, and tighten it clockwise.

　　5如果家里的球閥漏水，可以提前關閉整個閥門，卸下螺絲和手柄，在手柄小鐵條和閥門連接處纏上麻布或繩帶或棉線，擰緊手柄即可。

　　If the ball valve at home leaks, you can close the entire valve in advance, remove the screws and handle, wrap hemp cloth, rope or cotton thread around the connection between the handle small iron bar and the valve, and tighten the handle.

　　如何保養水管閥門

　　How to maintain water pipe valves

　　1、不要經常開關閥門，閥門內部有墊片，如果開關的頻率過高，那就會大大增加墊片的磨損率，使用一段時間以后，墊片就會變薄，從而也會導致閥門漏水。

　　1. Do not frequently open or close the valve, as there are gaskets inside the valve. If the frequency of opening or closing is too high, it will greatly increase the wear rate of the gaskets. After a period of use, the gaskets will become thinner, which can also lead to valve leakage.

　　2、要記得定期對閥門進行檢查，看看它的接口有沒有出現松動的情況，如果已經松動了，那就要在第一時間采取補救措施。

　　2. Remember to regularly inspect the valve to see if its interface is loose. If it is already loose, take remedial measures as soon as possible.

本文由良工閥門友情奉獻.更多有關的知識請點擊:http://www.kasidc.com/真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.